Thermaltake CL-W232-PL12SW-A Water 3.0 120 ARGB 120mm Liquid CPU Cooler
Shop Online
and fill your cart
Choose Payflex at checkout
Get approved and
pay 25% today
with your debit
or credit card
Pay the remainder
over 6-weeks.
No interest.
No fees.
– 120mm PWM Fan
– 120mm Radiator
– Copper Cold Plate
– Aluminium Radiator
– Durable Metal Fittings
– AMD Ryzen Support Included
– Sleeved Low-Permeability Rubber Tubing
– Integrated Fan Hub
– Themaltake Pure 12 Fan Provides Great Performance And Lighting Control
– Intel Socket Support: 2066/20113/2011/1366/1156/1155/1151/1150
– AMD Socket Support: FM2/FM1/AM4/AM3+/AM3/AM2+/AM2
- Description
- WARRANTY
- Reviews (0)
Description
Thermaltake Water 3.0 120 ARGB Sync. Purpose: Processor, Fan noise level (max): 25.8 dB, Fan connector: 4-pin. Fan power consumption: 1.44 W, Pump power consumption: 3.9 W, Pump voltage: 12 V. Type: Fan, Water block material: Copper, Tube material: Rubber. Weight: 920 g, Fan dimensions (W x D x H): 120 x 120 x 25 mm, Radiator width: 15.1 cm
Water 3.0 120 ARGB Sync Edition
Thermaltake Water 3.0 120 ARGB Sync Edition comes with one 120 mm fan with a large surface radiator, high-performance water block, and pump for ultimate CPU cooling. The built-in Pure ARGB fan features compression blades, hydraulic bearing, and 16.8 million colors LEDs that are ready to sync with 5V RGB capable motherboards from Asus, Gigabyte, MSI, and AsRock. Users can easily switch RGB lighting effects using the ARGB controller that is included in the packet, or by ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync, and AsRock Polychrome software. Water 3.0 ARGB Sync Edition Series allows users to enjoy the better cooling performance and greater CPU protection!
Tt LCS Certified
Tt LCS Certified is a Thermaltake exclusive certification applied to only products that pass the design and hardcore enthusiasts’ standards that a true LCS chassis should be held to. The Tt LCS certification was created so that we at Thermaltake can designate to all power users which chassis have been tested to be best compatible with extreme liquid cooling configurations to ensure you get the best performance from the best features and fitment.
Pure 12 ARGB Sync Radiator Fan
Water 3.0 ARGB Sync Edition is equipped with Thermaltake Pure 12 ARGB Sync Radiator Fan. It features compression blades, hydraulic bearing, and a 16.8 million colors LED ring with 9 addressable LEDs that is ready to sync with 5V RGB capable motherboards from Asus, Gigabyte, MSI, and AsRock.
Sync with Motherboard RGB Software
Designed to synchronize with ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync, and AsRock Polychrome. It supports motherboards that have a 5V addressable RGB header, allowing you to control the lights directly from the above-mentioned software without installing any extra lighting software or controllers. For more details, please visit ASUS, GIGABYTE, MSI, and AsRock’s official websites.
Switch LED Modes with ARGB Controller
The ARGB controller allows users to switch LED modes, LED colors, and LED Speeds when using a motherboard without a 5V addressable RGB header. Users can switch between flow, ripple, pulse, blink, wave, full light, RGB spectrum, and off modes with various colors and LED speed options.
High-Efficiency Radiator
Specially designed for Water 3.0 ARGB Series, the large surface radiator increases the cooling surface and exceptional heat dissipation.
High-Performance Waterblock
The high-performance copper base plate accelerates the heat conductivity. The pre-refilled coolant reduces any stress from liquid replenishment hassle. Additionally, the reinforced sleeved cable delivers the best durability and prevents the tubing from any damage.
High-Quality Pump
The high-quality and reliable pump enables the maximum amount of water circulation, keeping the copper plate continuously cool. The low evaporation tube effectively decreases the loss of coolant; therefore, no refill is required.
Easy Installation
Featuring the latest cooling performance, the self-contained design of the Thermaltake Water 3.0 ARGB Sync Edition Series provides an easy installation system and a totally maintenance-free operation, requiring only the minimum amount of space in the chassis.
SPECIFICATIONS | |
Brand | Thermaltake |
Series | Water 3.0 |
Model | CL-W232-PL12SW-A |
Fan Specifications | |
Fan Type | Thermaltake Pure 12 |
Rotational Speed | 500 ~ 1500 RPM |
Bearing Type | Hydraulic Bearing |
PWM Control | Yes |
Acoustic Noise | 25.8 dB-A |
Maximum Air Flow | 56.45 CFM |
Maximum Static Pressure | 1.59mm-H2O |
Input Voltage | 12V |
Pump Specification | |
Rotational Speed | 3000 RPM |
Input Voltage | 12V |
Radiator Dimensions | 151x 120 x 27 mm |
General | |
Coldplate Material | Copper |
Thermal Paste | Pre-applied |
Sockets Supported | Intel LGA 2066/20113/2011/1366/1156/1155/1151/1150 |
AMD FM2/FM1/AM4/AM3+/AM3/AM2+/AM2 | |
Package Contents | Thermaltake Water 3.0 Liquid CPU Cooler |
Mounting Hardware | |
Digital Lighting Controller | |
Control Cables |
2 Years
Be the first to review “Thermaltake CL-W232-PL12SW-A Water 3.0 120 ARGB 120mm Liquid CPU Cooler”
You must be logged in to post a review.
Reviews
There are no reviews yet.